Web Auth login page upload

[ChrisChris]

I am trying to upload a custom web auth login page to EWC runnning on C9115AXI. Is this possible as there does not seem to be an option?

[Kasun Bandara]

try this

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/16-12/config-guide/ewc_cg_16_12/wireless_web_authentication.html

[ChrisChris]

That document states

'The customized web pages (Login, Success, Fail, and Expire) are downloaded onto the embedded wireless controller and used during the local web authentication.'

but does not say how they are downloaded? Do they have to still be hosted elsewhere?

[Kasun Bandara]

check section 

Example: Assigning Login, Login Failure, and Logout Pages per WLAN

you can upload files to flash and map them 

[ChrisChris]

Can you confirm the commands required to upload the tar file containing the custom html pages to flash from tftp 

[ChrisChris]

I have since connected to the com port of the AP running the controller and run the following commands. The HTML was then available to select in the Web Auth config.

• enable
• copy tftp flash
• Address or name of remote host [x.x.x.x]
• Source Filename [*.html]
• Destination filename [*.html]