09-26-2015 02:28 AM - edited 07-05-2021 04:00 AM
Hi All,
I do know that captive portal could be setup on cisco WLC 2504, such that internet users could login as follows:
Username, password or mobile number.
And get the authorization code on mobile number.
However I would like to know whether the above configuration would work with just 2504 or do we need any other device to achieve this.
09-28-2015 03:35 AM
Hi Garuav,
Webauth will work with 2504 as well. WLC .
WLC can store max 2048 local entries so it depends on your requirement size.
you will need a RADIUS SERVER(We are using ISE) to store/assign guest credentials and send the Code/password via smtp/SMS gateway.
Regards
Dont forget to rate helpful posts
09-28-2015 10:56 PM
Hi Sandeep,
Thanks for your reply,
could you please share configuration guide for RADIUS SERVER(We are using ISE) to store/assign guest credentials and send the Code/password via smtp/SMS gateway.
Regards,
Gaurav singh
09-28-2015 11:39 PM
Not openly.....
Check your PM.
Regards
10-05-2015 03:51 AM
I am having problem in Cisco WLC 2504 at https://1.1.1.1
Would you please help to solve this issue ?
If there's any detailed best practiced document available to configure Cisco WLC 2504 with full controlled policies.
Would highly appreciate.
Thanks
Regards
Faisal Raza.
10-06-2015 09:18 PM
kindly follow below steps:-
Web Auth > Web Login Page
and configure redirect page to http or any http url.
Regards,
Gaurav
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide