WEBGUI 3850 SWITCH

[dnspacket1]

Dears,

I have cisco 3850 switch with with ios      3.03.01SE .

How we can enable webgui for 3850s. i referred the below link to do this activity

http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3se/system_management/configuration_guide/b_sm_3se_3850_cg_chapter_010101.html

There is inbuilt wireless controller on this switch.

I am unable to get any of the options as the wireless gui webpage itself is not coming.

Please help me how we can do this configs

Regards

Deva

[Sandeep Choudhary]

HI Deva,

Onboard web GUI requires Cisco IOS XE Release 3.2.2SE or later.

Go to CLI and congfigure these:

If you want unsecured (http://) web access, go to conf t and enter:

ip http server

If you want secure (https://) access, go to conf t and enter:

ip http secure-server

Regards

[dnspacket1]

Dear Sandeep,

I am able to access the switch. But I am unable to access the WLC settings.

But WLC is already configured and APs are associated on it.

But its configured without service port..

[Sandeep Choudhary]

HI Deva,

Di d u tried thsi:

  The GUI can be accessed via https:///wireless

Check this:

https://supportforums.cisco.com/docs/DOC-34430

http://mrncciew.com/2013/09/29/getting-started-with-3850/

Regards

[Rasika Nayanajith]

Hi

Try different browser & see. Below should work

https:///wireless

HTH

Rasika