01-25-2017 12:42 PM - edited 07-05-2021 06:26 AM
I am going to prime 500 access points. I am going to prime them on a small controller so they can download code, and I can set the primary/secondary controllers and give it a hostname.
This controller will be on the bench. No access to Cisco Prime.
During the priming process, I want to gather the base radio mac addresses because they need to be entered into the Vocera server. I want to have them entered into Vocera before they are hung.
So, my question is this: Is there an easy way to grab the base radio mac addresses from, say, ten access points as they sit on a priming controller? I can use the gui to do so, but that's cumbersome. I would rather use a CLI command, since that is how I program them. Only problem is, that I cannot find a command documented that will show me the base radio macs of ten access points.
Thanks in advance!
Solved! Go to Solution.
01-25-2017 01:26 PM
Use the show advanced 802.11a summary or the show advanced 802.11b summary.
-Scott
*** Please rate helpful posts ***
01-25-2017 01:26 PM
Use the show advanced 802.11a summary or the show advanced 802.11b summary.
-Scott
*** Please rate helpful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide