cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4979
Views
0
Helpful
8
Replies

what Lightweight AP IOS Software should I used for conversion

shari1001
Beginner
Beginner

hello everyone 

 

I have a couple AIR-SAP 1602i -E-k9 that i want to convert to cap but i am not sure which IOS software should I use

 

i have 

/ap1g2-k9w7-mx.152-2.JB/ap1g2-k9w7-mx.152-2.JB

 

 

is it ok to use the least IOS available on Cisco support for 1600i ???

 

 

2 Accepted Solutions

Accepted Solutions

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

https://software.cisco.com/download/release.html?mdfid=284366503&softwareid=280775090&release=15.3.3-JA1&relind=AVAILABLE&rellifecycle=ED&reltype=latest

View solution in original post

adding to LEO:

k9w7 - autonomous (or “site survey”) IOS
k9w8 – full lightweight IOS (this is what is bundled in the WLC .aes image, and is factory installed on “mesh” APs)
rcvk9w8 - lightweight recovery image – this is factory installed on lightweight APs, unless a “mesh” image is specified; it lacks radio firmware

download link is already provided by Leo.

 

Reagrds

View solution in original post

8 Replies 8

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend

https://software.cisco.com/download/release.html?mdfid=284366503&softwareid=280775090&release=15.3.3-JA1&relind=AVAILABLE&rellifecycle=ED&reltype=latest

Hi Leo

how do i recovery the ap via CLI command

regards

adding to LEO:

k9w7 - autonomous (or “site survey”) IOS
k9w8 – full lightweight IOS (this is what is bundled in the WLC .aes image, and is factory installed on “mesh” APs)
rcvk9w8 - lightweight recovery image – this is factory installed on lightweight APs, unless a “mesh” image is specified; it lacks radio firmware

download link is already provided by Leo.

 

Reagrds

I convert the ap but didn't join the WLC , it has an IP on same subnet as WLC.

i have 5500 series with 7.3v

I got this error on WLC

Discovery request decoding with subnet broadcast and wrong AP IP address.

 

this is the error log on AP :

 

%Error opening flash:/capwap-saved-config (No such file or directory)

 


*Mar  1 00:00:49.955: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar  1 00:00:49.955: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER."NAME of  domain "
*Mar  1 00:00:59.959: %CAPWAP-3-ERRORLOG: Go join a capwap controller


on Interface BVI1, changed state to up%Default route without gateway, if not a point-to-point interface, may impact performance
nv_done: unable to open "flash:/private-multiple-fs.new"
nv_done: unable to open "flash:/private-multiple-fs.new"
nv_done: unable to open "flash:/private-multiple-fs.new"
*Mar  1 00:00:25.147: %LWAPP-3-CLIENTERRORLOG: flash:/configs directory creation failedFailed to open flash:config.txt

*Mar  1 00:00:25.171:  Write of the Private File nvram:/lwapp_ap.cfg Failed on load, RCA needed
*Mar  1 00:00:25.175:  Write of the Private File nvram:/lwapp_ap.cfg Failed on load, RCA needed
*Mar  1 00:00:25.175:  Write of the Private File nvram:/lwapp_ap.cfg Failed on load, RCA needed
*Mar  1 00:00:32.579: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C3560G-48PS (0025.b4e5.3a8f)
*Mar  1 00:00:35.191: Logging LWAPP message to 255.255.255.255.

 

 

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend
Mar  1 00:00:35.191

The time and date is incorrect.  Post the following output: 

 

1.  AP:  sh version; 

2.  AP:  sh ip interface brief; 

3.  WLC:  sh sysinfo; and

4.  WLC:  sh time


Interface                  IP-Address      OK? Method Status                Prot            ocol
BVI1                       unassigned      YES DHCP   down                  down            
Dot11Radio0                unassigned      NO  unset  initializing          down            
Dot11Radio1                unassigned      NO  unset  initializing          down            
GigabitEthernet0           unassigned      NO  unset  up                    down            
GigabitEthernet0.1         unassigned      YES unset  up                    down    


Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Wed 23-Jan-13 13:15 by prod_rel_team

ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFTWARE (fc1)

AP7c69.f6e1.c628 uptime is 8 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-k9w8-mx.152-2.JA1/ap1g2-k9w8-mx.152-2.JA1"
Last reload reason:

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you

 

 

 

 

 

 

 

 

Leo Laohoo
VIP Community Legend VIP Community Legend
VIP Community Legend
Configured Country............................... Multiple Countries:DE,US

Can you please disable US and see if the AP will join.

Your WLC is set up with a manually-set time/date, which can be wrong.  Please ensure the time and date are correct because if your time is wrong, the AP will not join.

 


(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.112.0
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
 1.27
Build Type....................................... DATA + WPS

System Name...................................... a
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. SSO
IP Address....................................... 10.73.160.33
Last Reset....................................... Power on reset
System Up Time................................... 50 days 2 hrs 3 mins 36 secs
System Timezone Location.........................

Configured Country............................... Multiple Countries:DE,US
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +34 C

--More-- or (q)uit
External Temperature............................. +18 C
Fan Status....................................... OK

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 3
Number of Active Clients......................... 58

Burned-in MAC Address............................ 00:06:F6:DB:CD:00
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 50

(Cisco Controller) >show time

Time............................................. Mon Jan 26 11:34:04 2015

Timezone delta................................... 0:0
Timezone location................................

NTP Servers
    NTP Polling Interval.........................     86400

     Index     NTP Key Index     NTP Server      NTP Msg Auth Status
    -------  ---------------------------------------------------------------

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers