08-07-2018 09:13 AM - edited 07-05-2021 08:57 AM
Hi We have two ssid. Both have been configured with "All" in Radio Policy(WLANs ---> General ----> Radio Policy ----> All). but on user side(by command netsh wlan show interface), why one ssid is only having a band while the second ssid is only having n band? Thank you
Solved! Go to Solution.
08-07-2018 04:12 PM - edited 08-07-2018 04:13 PM
Depends on the configuration of the SSID. For 802.11n, the following configuration is required:
08-07-2018 10:02 AM
Hi
Probably the client adapter does not support both bands.
Take the adapter model and look at the datasheet.
-If I helped you somehow, please, rate it as useful.-
08-07-2018 11:04 AM
Thanks for your reply. In order to clear the issue, I use my PC to test it. When connecting to one ssid, it can get a band, when connecting second ssid, it get n band. so that means, this is not client adapter issue.
08-07-2018 04:12 PM - edited 08-07-2018 04:13 PM
Depends on the configuration of the SSID. For 802.11n, the following configuration is required:
08-08-2018 06:43 AM
I think you are right. Thank you so much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide