Wireless network security needs to be addressed from the outset, you really want to back up your WLAN with something like Cisco Secure ACS to make sure it's as watertight as you can make it.
As for bandwidth, AP's are like hubs, shared medium so all clients share the available bandwidth. Partial solution is to pack AP's closer so fewer clients per AP but this needs careful surveying and planning.
Other considerations are AP management, look at some of Cisco's newer solutions for centralised AP management/configuration. If you have lots of AP's you will need something like that to make the system manageable.
Table of Contents
Table of ContentsOverviewConnecting a Catalyst 9800 WLC to Cisco DNA Center ManuallyConnecting an AireOS WLC to Cisco DNA Center ManuallyCisco DNA Center Assurance Deployment Guide References
The purpose of this document...
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...