wireless access point 1041

[evanssh]

I have a wireless network using the cisco ap 1041 converted into the anonymous. however it seems like every morning or evening I have to attached it back to the SSID all over again. it will not give me an ip address. I also would have to put the encryption key in again. I am using WEP 40 bit. Has anyone experience this issue before?

Sent from Cisco Technical Support iPad App

[Stephen Rodriguez]

Not an issue I've seen. But I don't run WEP as it I easily cracked.

I'd switch to WPA/WPA2 personally

Steve

Sent from Cisco Technical Support iPhone App

[EvaldasOu]

I want to ask about 1041 AP too.

How much maximum SSID's it can support? There is no information in datasheets

Maybe 16 SSID's as 1142 AP?

Thanks!

[Stephen Rodriguez]

All Cisco AP support a maximum of 16 SSID. Though I would not recommend going beyond 3-4. Other wise you create your own interference.

Steve

Sent from Cisco Technical Support iPhone App

[Amjad Abdullah]

Are u sure u save config after u do configuration?

Sent from Cisco Technical Support iPad App