11-20-2013 07:10 PM - edited 07-04-2021 01:18 AM
Hi Everyone,
I have Cisco 1811W at home for my wi fi network.
i lose the wi fi connection and after few mins it was working again.
Here are logs from Router
Nov 20 19:52:12.721 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 1811w 74e5.0b5b.e788 Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 19:54:29.113 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station a00b.bacf.37a5 Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 19:57:08.625 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 74e5.433b.c8db Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 19:57:40.741 MST: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 74e5.433b.c8db Reason: Previous authentication no longer valid SSID[ACDinternet]
Nov 20 19:57:42.205 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 74e5.433b.c8db Reassociated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 20:01:28.835 MST: %DOT11-4-MAXRETRIES: Packet to client 74e5.433b.c8db reached max retries, removing the client
Nov 20 20:01:28.835 MST: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 74e5.433b.c8db Reason: Previous authentication no longer valid SSID[ACDinternet]
Nov 20 20:01:29.851 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 74e5.433b.c8db Reassociated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 20:01:29.863 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:43.880 MST: %DOT11-4-MAXRETRIES: Packet to client 74e5.433b.c8db reached max retries, removing the client
Nov 20 20:01:43.880 MST: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 74e5.433b.c8db Reason: Previous authentication no longer valid SSID[ACDinternet]
Nov 20 20:01:44.908 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.936 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 74e5.433b.c8db Reassociated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 20:01:44.940 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.940 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.940 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.944 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.944 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.944 MST: %DOT11-4-TKIP_MIC_FAILURE: TKIP Michael MIC failure was detected on a packet (TSC=0x859D0F5200000000) received from 0000.0000.0000.
Nov 20 20:01:44.944 MST: %DOT11-3-TKIP_MIC_FAILURE_REPEATED: Two TKIP Michael MIC failures were detected within 15 seconds on Dot11Radio0 interface. The interface will be put on MIC failure hold state for next 60 seconds.
Nov 20 20:02:49.401 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 40fc.894e.c48c Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 20:02:58.614 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 74e5.433b.c8db Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Nov 20 20:03:56.035 MST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station a00b.bacf.37a5 Associated SSID[ACDinternet] AUTH_TYPE[OPEN] KEY_MGMT[WPA PSK]
Need to know if these logs tells any reason for disconnection?
Regards
Mahesh
11-20-2013 10:16 PM
Error Message DOT11-TKIP_MIC_FAILURE_REPEATED: Two TKIP Michael MIC failures were detected within [number] seconds on [interface] interface. The interface will be put on MIC failure hold state for next [number] seconds
Explanation Because MIC failures usually indicate an active attack on your network, the interface will be put on hold for the configured time. During this hold time, stations using TKIP ciphers are disassociated and cannot reassociate until the hold time ends. At the end of the hold time, the interface operates normally. Severity level: 3.
Recommended Action Michael MIC failures usually indicate an active attack on your network. Search for and remove potential rogue devices from your wireless LAN. If this is a false alarm and the interface should not be on hold this long, use the countermeasure tkip hold-time command to adjust the hold time.
11-21-2013 08:13 AM
Hi Saurav,
Which interface i should config above command?
Also should i config hold time to less than 60 secs as seems 60 secs is default time.
There is no rogue device in my network.
Regards
Mahesh
11-20-2013 11:06 PM
Configure your wireless to support WPA2/AES with PSK, if it is supported on this model. Then you should not worry about this WPA/TKIP issue.
HTH
Rasika
**** Pls rate all useful responses ****
11-21-2013 08:14 AM
Hi Rasika,
Seems currently router is supporting WPA only.
Can you tell me which IOS version supports WPA2?
Regards
Mahesh
11-21-2013 12:06 PM
I am not too sure Mahesh... if you have 256/64 (DRAM/FLASH) you can try to download latest image (c181x-adventerprisek9-mz.151-4.M7.bin) for this platform & see if that supports WPA2.
Documentation says WPA, but you could verify that since you have the product with you.
HTH
Rasika
**** Pls rate all useful responses ****
11-22-2013 04:12 AM
Here is the command to disable countermeasure from the cli
http://www.my80211.com/cisco-wlc-cli-commands/2009/12/29/configure-tkip-countermeasure-holdoff-timer-on-wlc.html
Sent from Cisco Technical Support iPad App
11-20-2014 03:56 AM
Hi,
Try latest version, which might have WPA2 supported.
11-20-2014 04:55 AM
Do you know any version which supports WP2?
Regards
MAhesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide