Wireless controller AIR-CT2504-K9 adddtion AP

[karinn001]

Hi,

I have the wireless controller and it is showing me 25 AP limit. I would like to know is it possible to increase the access points capacity either by using licences?

Burned-in MAC Address............................ 68:86:A7:36:8C:C0
Maximum number of APs supported.................. 25
NAME: "Chassis"    , DESCR: "Cisco 2500 Series Wireless LAN Controller"
PID: AIR-CT2504-K9,  VID: V01,  SN: PSZ165101A2

[Leo Laohoo · Accepted solution]

Depending on the firmware version, the 2504 can support betweeen 50 & 75 AP.  

[karinn001]

Hi Leo,

I have the following software

Software Version

7.4.121.0

kindly let me know how much AP can support this software version.

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.121.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0

[Leo Laohoo]

Go HERE and look under Table 1.

Starting with 7.4, 2504 can support up to 75 APs.