01-10-2007 01:04 AM - edited 07-03-2021 01:27 PM
I have a network, everything in VLAN1 (I know this is not good, but for the moment, I like to keep it that way) I installed a WLC 4402, but I cant seem to get my wireless clients in the same VLAN as the controller. Is this normal? Is there a way around? Thank You
Solved! Go to Solution.
01-12-2007 08:39 AM
I have done this without any issues in a flat network. You do not need to create any new interfaces since it is flat. In your wireless lan SSID, use the management interface as its interface. If the VLAN is flat, make sure the VLAN identifier is 0. Hope this helps.
01-12-2007 08:39 AM
I have done this without any issues in a flat network. You do not need to create any new interfaces since it is flat. In your wireless lan SSID, use the management interface as its interface. If the VLAN is flat, make sure the VLAN identifier is 0. Hope this helps.
01-14-2007 05:59 AM
Yes this works. Thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide