04-13-2013 12:05 AM - edited 07-03-2021 11:54 PM
hi,
i am looking around how to copy system software .aes to tftp server . and ram installed in WLC of 6500 wism ?
try looking any command, i want to copy WLC software to tftp server . Because My WLC software version can not be found in the Cisco official website
thanks..
--------------Show udi---------------
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: WS-SVC-WISM-1-K9, VID: V01, SN: FAS120906VL
---------------Show sysinfo---------------
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.157
RTOS Version..................................... 6.0.199.157
Bootloader Version............................... 4.0.219.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS
System Name...................................... gangtie-2
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.4
IP Address....................................... 10.107.74.60
System Up Time................................... 59 days 19 hrs 36 mins 12 secs
System Timezone Location.........................
--More-- or (q)uit% I
.................. 5168172 Secs
erhead bytes)
ar 13 10:09:27.916: %APF-6-MOBILE_NOT_EXCLUDED: apf_ms.c:3785 Could not exclude the mobile 00:50:f6:2d:85:8b.
Configured Country............................... CN - China
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +42 C
State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 224
Burned-in MAC Address............................ 00:1E:F7:D6:FE:E0
Maximum number of APs supported.................. 150
---------------Show Interface ---------------
Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 00:1e:f7:d6:fe:eb
IP Address....................................... 10.107.76.8
IP Netmask....................................... 255.255.248.0
IP Gateway....................................... 10.107.76.1
--More-- or (q)uit
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. untagged
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.107.76.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Solved! Go to Solution.
04-13-2013 03:56 AM
The last number is 157 !!!!!!!
Calm down.
The last number is .157 is because your file is a SPECIAL ENGINEERING FIX released by Cisco TAC on a case-to-case basis.
If you want exactly the same thing, create a Cisco TAC Case.
04-13-2013 12:10 AM
WiSM-1 software can be found here.
04-13-2013 12:13 AM
S/W Version .................................... 6.0.199.157
Boot Version ................................... 12.4.13.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Primary Boot Image............................... Code 6.0.199.157
hi:
my boot image version is 6.0.199.157 ,but i can not be found in the Cisco official website.i must find it .what can i do it ?
thanks! my wlc is 6500 wism.
04-13-2013 12:19 AM
--------------Show udi---------------
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: WS-SVC-WISM-1-K9, VID: V01, SN: FAS120906VL
---------------Show sysinfo---------------
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.157
RTOS Version..................................... 6.0.199.157
Bootloader Version............................... 4.0.219.0
Emergency Image Version.......................... N/A
Build Type....................................... DATA + WPS
System Name...................................... gangtie-2
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.4
IP Address....................................... 10.107.74.60
System Up Time................................... 59 days 19 hrs 36 mins 12 secs
System Timezone Location.........................
--More-- or (q)uit% I
.................. 5168172 Secs
erhead bytes)
ar 13 10:09:27.916: %APF-6-MOBILE_NOT_EXCLUDED: apf_ms.c:3785 Could not exclude the mobile 00:50:f6:2d:85:8b.
Configured Country............................... CN - China
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +42 C
State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 224
Burned-in MAC Address............................ 00:1E:F7:D6:FE:E0
Maximum number of APs supported.................. 150
---------------Show Interface ---------------
Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 00:1e:f7:d6:fe:eb
IP Address....................................... 10.107.76.8
IP Netmask....................................... 255.255.248.0
IP Gateway....................................... 10.107.76.1
--More-- or (q)uit
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. untagged
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 10.107.76.1
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
04-13-2013 12:23 AM
what can i do it ?
I have already posted the link where you can choose and download the file.
04-13-2013 12:25 AM
S/W Version .................................... 6.0.199.157
Boot Version ................................... 12.4.13.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
Primary Boot Image............................... Code 6.0.199.157
hi:
my boot image version is 6.0.199.157 ,but i can not be found in the Cisco official website.i must find it .what can i do it ?
i can not see 6.0.199.157
04-13-2013 12:27 AM
04-13-2013 12:33 AM
how to copy system software .aes to tftp server
You CANNOT copy the software from the WiSM to the TFTP server. You download from the Cisco website.
but i can not be found in the Cisco official website
Your initial question is you cannot find the file location from the Cisco website, hence, I provided the link.
04-13-2013 01:01 AM
I can not see this version 6.0.199.157 , can you give me a screenshots! this is 157
04-13-2013 01:02 AM
The last number is 157 !!!!!!!
04-13-2013 03:56 AM
The last number is 157 !!!!!!!
Calm down.
The last number is .157 is because your file is a SPECIAL ENGINEERING FIX released by Cisco TAC on a case-to-case basis.
If you want exactly the same thing, create a Cisco TAC Case.
04-13-2013 07:16 AM
thanks!
04-13-2013 09:05 AM
e3200
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide