Solved: Wireless LAN controller 4402

r.vanschendel · ‎01-26-2008

Is it possible to config only 1 GB connection to 4402 LAN controller. Or must I use both Gb connectors ?

Because I have only 1 Gb port free on my switch.

ankbhasi · ‎01-26-2008

Hi Rene,

You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.

But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.

HTH

Ankur

*Pls rate all helpfull post

View solution in original post

ankbhasi · ‎01-26-2008

Hi Rene,

You can very well use only one gig port to connect to the switch. 2 ports can be used if you want to have por tchannel on switch and you want your controller to work with LAG.

But you can simply connect 1 port on switch to the controller and while configuring manamenet and ap-manager interface bind them to one physical port whichever you are using.

HTH

Ankur

*Pls rate all helpfull post