01-17-2011 07:35 AM - edited 07-03-2021 07:41 PM
Hi all
I have used more than 47 ap's on my 4402, and now it wont add any more, If I enable LAG it comes up with a warning saying it will delete all my current interfaces, is this true?? or if I enable LAG should it still work as before??
cheers
Solved! Go to Solution.
01-17-2011 07:44 AM
Carl,
Enabling LAG does not delete the interfaces. So if you enable LAG and reboot, you should be fine. Alternately, you could configure another AP-Manager and link it to the other port.
Cheers,
Steve
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
01-17-2011 07:44 AM
Carl,
Enabling LAG does not delete the interfaces. So if you enable LAG and reboot, you should be fine. Alternately, you could configure another AP-Manager and link it to the other port.
Cheers,
Steve
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
01-18-2011 11:51 AM
carl,
Keep in mind you will need to etherchannel your switch if you use LAG and keep all the connections on the same switch.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide