01-17-2022 01:21 AM
Good morning,
My clienet has a Wireless Network with AP-1600 and AP-2800, WLC-3504 controller with Firmware 8.5.161
He uses an application that advertises itself via MULTICAST, and it doesn't work.
Multicast propagation has been enabled on the controller, but it still does not work.
Does anyone confirm that multicast is regularly propagated via WiFi ?
Thank you
01-17-2022 01:56 AM
- Let the client have a look at this document and compare settings accordingly : https://mrncciew.com/2012/11/17/configuring-multicast-on-wlc/ , pay attention to the cli verification commands too near the end of the document.
M.
01-17-2022 05:03 AM
IMHO, this concerns the Multicast used in the communication between AP and WLC.
My problem concerns the multicast used by an application
01-17-2022 03:47 AM
Which mode the AP's are in? (Flex or local)
01-17-2022 05:01 AM
local Mode
01-17-2022 01:07 PM
is Multicast enabled on the wired side?
01-19-2022 07:25 AM
All the Switches are HP "Web-managed", I'm trying to enable multicast on those ...
However: both devices communicate via Wireless, do you think it is necessary that the Switches carry the multicast?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide