08-26-2013 03:35 AM - edited 07-04-2021 12:42 AM
Hi all,
One of my client was using Autonomous Wireless setup in 2 of their offices, and user authentication was done through Certificate based authentication using AD. In one of their office, saying Office-1, they deployed WLC 5508 and all the autonomous APs were replaced with LWAPP APs. Controller is integrated with AD using Microsoft IAS and users are successfully authenticating.
Now, there is strange problem. Once the user creates a Wireless Profile at Office-1 and successfully connects to the Network, and then he/she moves to Office-2, he is not able to re-connect to the Network and he/she has to delete the existing profile, create the same profile again and then he/she is able to join the Network. Wireless Profile configuration is same for both the locations, except for the thing that Office-1 has Wireless LAN controller and Office-2 does not have WLC. This issue is being faced with only Windows 7 machines, and on Windows XP, it is working fine without deleting/creating new Wireless profile. Looking forward for valuable response.
Regards, Sohail
08-26-2013 05:36 AM
It's probably how the WLAN is setup. Can you post the show run-config from the autonomous ap and the show WLAN
The ssid is using 802.1x, should either be using WPA/TKIP or WPA2/AES. This should not be used together or mixed up like if you have on the WLC WPA/AES or WPA2/TKIP.
Sent from Cisco Technical Support iPhone App
08-26-2013 05:43 AM
Hi Scott,
Currently I have Show run-config of the autonomous AP which is as follows:
=============================================================================
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname DIFC_NGN_1
!
enable secret 5 $1$lAVY$r6aQXsi6VmDXsbzDlw.tB.
!
aaa new-model
!
!
aaa group server radius rad_eap
server 172.30.1.236 auth-port 1645 acct-port 1646
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
!
aaa group server tacacs+ tac_admin
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
!
aaa session-id common
!
!
!
dot11 ssid NGN8021x
authentication open eap eap_methods
authentication network-eap eap_methods
guest-mode
!
power inline negotiation prestandard source
!
!
username Cisco password 7 143A411F0F07232725
username Admin privilege 15 password 7 002940120758020A0E
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode wep mandatory
!
ssid NGN8021x
!
fragment-threshold 2300
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
encryption mode wep mandatory
!
ssid NGN8021x
!
no dfs band block
channel dfs
fragment-threshold 2300
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold-queue 160 in
!
interface BVI1
ip address 172.30.200.6 255.255.240.0
no ip route-cache
!
ip default-gateway 172.30.200.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server host 172.30.1.236 auth-port 1645 acct-port 1646 key 7 013E551058080F0320
radius-server vsa send accounting
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
!
end
=============================================================================
Based on above AP config, can you please advise what configuration I should do on WLC to make it work properly? In the meanwhile, I am trying to get the show wlan output from the customer.
Regards, Sohail
08-26-2013 06:43 AM
Hi Scott,
I have managed to get the show wlan output from the controller. Here it is..
(Cisco Controller) >show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... NGN8021x
Network Name (SSID).............................. NGN8021x
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status ....................... Disabled
DHCP ......................................... Disabled
HTTP ......................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 7
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WLC-METLIFEACLICO-DIFC-01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
--More-- or (q)uit
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 172.30.1.236 1645
Accounting.................................... 172.30.1.236 1646
Interim Update............................. Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
--More-- or (q)uit
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
--More-- or (q)uit
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Disabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
--More-- or (q)uit
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
------- --------------- ------
802.11u........................................ Disabled
--More-- or (q)uit
MSAP Services.................................. Disabled
Regards, Sohail
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide