cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3261
Views
35
Helpful
28
Replies

Wireless VLANs

pcfreak49
Level 1
Level 1

I have a question about the 800 16 wireless LAN you can make you that both 2.4GHz and 5GHz on?

28 Replies 28

I 881 891 892 routers

Well the max SSID is 16 and you can have only one SSID per vlan.

https://supportforums.cisco.com/docs/DOC-16145

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

I know but that also by Ghz
dot11radio I much as I want
but if I want to make gigabit ethernet that does not work with 16?

The Ethernet has nothing to do with SSIDs.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

because if not I sub gigabit ethernet not working to make ssid I can not access the Internet

Did you look at the link I posted?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

yes I can not 16 but 10 and sub ​​gigiabiteternet make that work?

So 10 must be a limit on the router.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

how ssids you by a 2.4GHz 5GHz

If you look at the doc it explains how to setup SSIDs and how to specify what vlan. You can put the same SSID on both 2.4 and 5ghz.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

10 or 16 ssid on 2.4GHz

10 or 16 ssid on 5GHz

this is possible?

16 max SSIDs on the AP

http://www.cisco.com/en/US/docs/routers/access/1800/wireless/configuration/guide/s37ssid.html#wp1034609

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Well the max SSID is 16 and you can have only one SSID per vlan.

Scott,

There's just one flaw to this statement.  Particularly when you're dealing with the ISR G2 860/880 and 890.

The 890 will only support up to 14 VLANs (including VLAN 1). 

The 890 will only support up to 8 VLANs (including VLAN 1).

And finally, 860 will only support up to 2 VLANs (including VLAN 1).

So if this is a 1:1 mapping on an autonomous mode AP ...

Thanks for the update Leo. Hopefully this helps the poster.

I was looking at this link

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080094322.shtml#max_no_vlans

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card