cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
645
Views
0
Helpful
2
Replies

Wireless WAN Connection using AiroNet 350

igor.sotelo
Level 1
Level 1

Hi All,

We are evaluating the installation of a wireless WAN connection, using Cisco 350 Wireless equipment. The basic requirement is to connect two distant LAN-s.

Basically, we don't have it clear, if we need:

- Two Cisco Aironet 350 Wireless Bridges, or

- One Cisco Aironet 350 Wireless Bridge and one Cisco AiroNet 350 Workgroup Bridge, or

- Two Cisco AiroNet 350 Workgroup Bridges

...to make the connections.

Regards,

Igor Sotelo.

2 Replies 2

amitubale
Level 1
Level 1

Two Cisco Aironet 350 Wireless Bridges should work fine. You cannot use Ap350 to connect 2 distant lans nor a combination of 1 ap and 1 bridge.

I am not sure if Cisco still sells BR-350. I resently read something about 1400 series. Please check their wireless products.

But you would need 2 bridges to connect 2 distant lans.

You can still get the 350 bridges for 802.11b technology and 1400 for 802.11 a technology. Both can run across distances close to 25 miles. (Line of sight is required).

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus
Review Cisco Networking for a $25 gift card