06-21-2013 03:10 AM - edited 07-04-2021 12:16 AM
Hi,
We have a setup where by we have internal WLC (cisco 5508) and a Guest WLC (cisco 4402) in the DMZ. The Gues SSID in internal wlc is anchrorded back to Guest WLC in DMZ (the guest dmz also serves as dhcp). We seem to have problems with this recently with users complaining that they get limited access or not able to get the redirection page (web page certificates - redirection to 1.1.1.1)
Does any one know if the cisco 5508 controllers / cisco 4400 running dhcp have any problems with this ?
Thanks
Solved! Go to Solution.
06-24-2013 03:17 AM
Fast SSID change is in the GUI under the controller tab.
Your time should be set the same especially if they are located in the same timeline. It's really for the APs but it good practice.
Sent from Cisco Technical Support iPhone App
06-25-2013 01:02 AM
scott, i have done a debug and tried connecting to the ssid. What i found was whenever it connected, i could see debug mesgs on both controllers but when it didnt connect or limited connectivity then i could see only debug msgs on internal wlc which tells me that the dmz wlc is not receving any sort of infro from internal wlc. I ahve checked mobility tunnel and they seem to be UP. anything you can think of ?
06-28-2013 01:35 AM
Hi Scott,
i found what the problem is. i did a debug on internal and dmz controller. I found that when a client doesnt conenct to a ssid then on running the debug for some reason the client seems to connect officeextend controller and i can see debugs on that (did a debug client
attached debug logs
Thanks
07-08-2013 05:24 AM
scott,
you are correct with the mobility anchor. it was an incorrect entry on the mobility anchor that was causing the issue and there was also another issue with the termination of the interface under AP groups. (incorrect interface set)
once i correct the above, its fine now. Thanks for your help
07-08-2013 07:49 AM
Glad you got it working!
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide