WISM Interface Grouping with different subnets

[cwwong1973]

WISM v7.0 VLAN Select.

Anyone can confirm if the VLANs subnet to be configured under interface group MUST be having the same subnet.

Eg. VLAN1 - mask 255.255.255.248

      VLAN2 - mask 255.255.255.120

Would these two VLANs be able to work together in interface grouping?

Thanks in advance.

Cheers,

Wong

[Scott Fella · Accepted solution]

The subnet mask doesn't matter, but the smaller subnet will ge marked dirty first since it is a smaller subner.

Sent from Cisco Technical Support iPad App