03-29-2013 02:11 AM - edited 07-03-2021 11:48 PM
Can someone tell me what the best configuration is for the following scenario:
Site1 (Head Office & Data Centre)
100 users
Site2
80 users
Site3
40 users
Site4
40 users
Site5
30 users
Each of the sites has its own Domain Controller.
My idea is to have a vWLC at Site1 and configure AP's in H-REAP/Flexconnect mode at each of the other sites with local switching and radius authentication on the local DC.
Is this a feasible design or is there a better way?
03-29-2013 02:17 AM
Are you planning to use Catalyst 3850 as your LAN switch at each site?
If you are, then you can use the 3850 to terminate 50 APs at a time and enable the WLC.
03-29-2013 02:21 AM
Most switches will be 3560's.
Site 1 will have 4507.
Each site will need less than 5 AP's.
Thanks
03-29-2013 02:36 AM
Well then, if you will have an authentication server at each site then H-REAP is a very ideal choice.
03-29-2013 05:26 AM
I think the max AP that is supported on a vWLC is 200? You have over 200 AP's.
Sent from Cisco Technical Support iPhone App
04-08-2013 06:06 AM
We have over 200 users, not AP's. We have around 25 AP's maximum.
04-08-2013 06:12 AM
Your right;:)
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide