Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Dear Sir / Mdm Question 1)May i know ISE keeps track of active endpoints in its session directory, as long as the endpoints are authenticated sucessfully their sessions will be in the session directory and consume license counts until either accounti...
Any news?Sent from Cisco Technical Support iPhone App
Hi , We have a centralized Cisco 5508 WLC with 84 APs(1142N) in branches (slow WAN links), Current WLC IOS version is 7.0.220.0. Recently we bought new Aps Air CAP36021-N. These APs are not compatible with existing WLC IOS. If I upgrade WLC, then c...
How do I set up an AT&T (Cisco) microcell to my AT&T 2-Wire gateway along with my I phone 4 and Mac on wifi?
I have Cisco LAP1522 configured as a Root Mesh AP - it needs to support multiple vlans across the mesh. The G0 port is configured for trunk with VLAN 310 as native and VLAN 590 added as an allowed vlan.The AP is directly connect to a Cisco 3750G and...
Hi I have created SSID's that remote users can log onto to that point to thier own Radius servers. Someone suggested that I need to use Anchor Mobility. Can you please tell me what this is in WLC and where I can find this. Thank you
Hello,In my environment i have this topology :WLC ~~~~~~|Another Vendor Client Radio doing Bridge|----Camera | |----RAP-1552E~~~~~~~MAP-1552E~~~~~|Another Vendo...
Hello,Having gone through the Enterprise Mobility 4.1 Design Guide, I understand there are several types of roaming options:Layer 2 roaming (within 1 or multiple WLCs)Layer 3 roaming (multiple WLCs)I wanted to find out if Layer 3 roaming (APs in diff...
Hi,How can I upgrade my 1041N AP to lightweight firmware? I found an upgrade tool which works in only XP and 2000 machines. I do not have these outdated OS so is there another way to upgrade it to lightweight?Thanks
I tried accessing wifi though my Android mobile in my college, which is NAC installed. The mac address of my device was successfully added to the portal, but I'm not able to connect my device to the respective wifi network.Can anyone suggest what's t...
Hi,I have problem with my WLC2504. My WLC is connected through two ports (1 and 2 of four) to my distro switch, where I have dot1q trunks configured. WLC is configured with Management interface (IP address 192.168.255.9/24), over which my LAPs ar...
Dear All,Our offcie use WLC2100 Series controller with AIR-LAP1031 and successfully join and running. Now i am trying to replace one ap with AIR-LAP1041N and join with WLC, but i can't and below the error message generate:"*Mar 25 02:37:28.000: %CAP...
Hi,I have Cisco 1131 & 1300 Light Weight Acces Points and I have 5508 WLAN controller. If i enable the wlan controller internal DHCP Server can this access points will work with this internal DHCP server or do i need to configure DHCP option 43 for ...
Hi,Can anybody comment on the mounting for the above antenna types. Please see figures below. The figures above, are the antenna mounting correct? For figure 1, can the two antennas be separated by 4" or more? For figure 2, the t...
I am still new to wireless. I have been studing for my CCNA Wireless for about 6 months now so I still have a lot of questions.Right now I have to deploy some new APs. We are using 3502e APs. I have a qustion on how to mount antennas for these access...
