cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1037
Views
0
Helpful
4
Replies

WLC 2112 upgrading software problem (7.0.250.0)

Rosa Ladera
Level 1
Level 1
  

Before upgrade

Model AIR-WCL2112-K9

Version  6.0.199.0

Emergency Image Version N/A

Bootloader Version 4.0.191.0

Upgrade commands

transfer download datatype code                           
transfer download mode ftp                                
transfer download serverip X.Y.Z.W                 
transfer download path /home/rosa/Desktop/UPGRADES/Upgrade-WLCs                              
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes
transfer download username usuario
transfer download password senha
transfer download port 21
transfer download start

Save & Reboot via web page

ransfer download datatype code                           
transfer download mode ftp                                
transfer download serverip X.Y.Z.W                 
transfer download path /home/rosa/Desktop/UPGRADES/Upgrade-WLCs                              
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes
transfer download username usuario
transfer download password senha
transfer download port 21
transfer download start

Save & Reboot via web page

After upgrade version was unchanged e emergency image version was upgraded

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.0
RTOS Version..................................... 6.0.199.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... 7.0.250.0
Build Type....................................... DATA + WPS

System Name...................................... impa-wireless3
System Location.................................. DataCenter
System Contact................................... netadm@impa.br
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... A.B.C.D
System Up Time................................... 0 days 0 hrs 2 mins 51 secs
System Timezone Location......................... (GMT -3:00) Buenos Aires (Agentina)

Configured Country............................... Multiple Countries:US,BR
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +57 C

State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 4
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0

Burned-in MAC Address............................ 00:21:A0:FE:A7:C0

How can I upgrade de boot version ?

 

(Cisco Controller) >show boot
Primary Boot Image............................... 6.0.199.0 (active)
Backup Boot Image................................ 5.2.178.0

 

2 Accepted Solutions

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes

That's because you only upgraded the bootstrap.  The "ER" in the filename means it's bootstrap.  

View solution in original post

Sandeep Choudhary
VIP Alumni
VIP Alumni

 

Agree to Leo :)

You must download this software from cisco.com:

AIR-WLC2100-K9-7-0-250-0.aes

Here is the link:

http://software.cisco.com/download/release.html?mdfid=282210721&flowid=7010&softwareid=280926587&release=7.0.250.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest

 

Regards

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame
transfer download filename AIR-WLC2100-K9-7-0-250-0-ER.aes

That's because you only upgraded the bootstrap.  The "ER" in the filename means it's bootstrap.  

It worked fine.

Thanks

Rosa

 

Sandeep Choudhary
VIP Alumni
VIP Alumni

 

Agree to Leo :)

You must download this software from cisco.com:

AIR-WLC2100-K9-7-0-250-0.aes

Here is the link:

http://software.cisco.com/download/release.html?mdfid=282210721&flowid=7010&softwareid=280926587&release=7.0.250.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest

 

Regards

It worked fine.

Thanks

Rosa

Review Cisco Networking for a $25 gift card