02-16-2012 11:00 PM - edited 07-03-2021 09:36 PM
Hello!
I try to make custom web-auth bundle for WLC 2125. User authentication from this custom page work fine, but any error messages about wrong login/pass not work.
Is this supported function for custom pages? If yes, could you result a working html-code?
02-16-2012 11:15 PM
Dmitry,
Are you working with the Cisco.com downloadable login templates package as your starting point?
Justin
Sent from Cisco Technical Support iPhone App
02-16-2012 11:41 PM
Hi Justin,
Unfortunatelly I dont have appropriate smartnet to download this bundle from cisco.com. Can you give me this .zip file?
02-17-2012 12:18 AM
Dmitry,
I don't believe my agreement with Cisco permits me to post it, but you could try reaching your local Cisco account manager to see if there's anything that can be done about getting the package directly from your local team.
The good news for you is that there is a section in the WLC config guide titled, "Assigning Login, Login Failure, and Logout Pages per WLAN." You can read it at this link:
http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70users.html#wp1075664
Even without the downloadable bundle, you can create your own login.tar bundle by setting up WebAuth on your controller and then triggering the various conditions (login, login failure, logout) so that the pages display. Then you can just grab the page code, modify, and then re-upload as your own custom bundle.
NOTE: Do not use the WebAuth configuration "Preview" page as your baseline login page template. It's not the same as the actual login page presented at login time.
Justin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide