WLC 2504 and DHCP For Computer Client

[sebastienlex]

Hello,

I installed my WLC 2500 Serie ( 2504 ) on my network.
I have an dhcp on my ASA 5500.
It's working for my Wired link clients from my switch 2960.
My AP have DHCP IP
but i don't now  where i must go on my WLC to configure DHCP for my computer clients.

I would like than my AP give DHCP of my ASA to my computers clientsCan you help me ?

Best regards,

Sébastien.

[marce1000]

 - FYI : https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/dhcp.html
           https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html

  M.

[Flavio Miranda]

Hi

 Assuming you created one SSID, on the WLC, you need to setup the DHCP server on the WLC Interface. I believe it would be easier if you follow this guide

https://rscciew.wordpress.com/2014/07/16/dhcp-with-the-wlc/

[sebastienlex]

Thank you all of us.
I'm goin to read your link.

[sebastienlex]

Thank you very much.

I tried last night after work, and it's work !!! 

Next step this weekend, try differents VLAN with mode trunk after, next step ! 

Best regards,

Sébastien.