Wireless

I know that the controller is disabled globally. But there's a risk I'm trying to disable ipv6 only for the wlan I'm testingI don't see the relevant settings Can't you disable ipv6 for each wlan? wlc version : 8.10.171.0

Hello All,We have Cisco 9800 Guest users getting disconnected post portal authentication. Not all users few of users. Setup:Foreign 9800-L --> Anchor WLC 9800-LGuest SSID --> Open Layer 2 Security, Layer 3 Web-Auth External URL redirection(Aruba Clea...

As part of SwiftStart Agency, where we specialize in boosting sales for Amazon clients, I'm researching the best wireless devices for internet connectivity. What are some top recommendations for routers, extenders, or other devices that can improve i...

Hello, I noticed some strange behavior yesterday on our 5520 controllers running version 8.5.135 and was wondering if this was 'working as designed' or rather a bug.While troubleshooting a coverage issue, I noticed a lot of our APs were using a chann...

wlc is 5508I connected the ap with a flexconnect When the ap equipment band and the user band are the sameCan't get ip from dhcp server. However, I changed the user band and made it different from the equipment band, and I confirmed that I was receiv...

Dear Team,We have AP model is AIR-AP1562I-D-K9 and one AP is act as mobility express controller , and on that AP( WLC ) two SSID are configured from that AP it is successfully broadcast SSID and clients are able to connect on that SSID , this WLC  lo...

I have the below out put for the sh ap ethernet statistics from the 9800 WLC. AP Name : WAP001 Interface Name Status Speed Duplex Rx Packets Tx Packets Discarded Packets---------------------------------------------------------------------------------...

Hi I got a branch office with small  Checkpoint SMB firewall, and I got a Cisco AP 2702 connected to it. All other devices are working correctly! The AP is getting an IP address and asking the correct DNS server about "CISCO-CAPWAP-CONTROLLER." yet i...

My company is just getting started deploying Meraki at our multiple sites. Currently I have a handful of switches and WAPs at two locations, but their SSID's are not centralized, and each site can have different SSID's. I would prefer to have a singl...

with a private certificateI downloaded it to Web Authentication on wlc and rebooted it to make sure it went in properly What I'm curious about here is that when I look at the certificate in the .cer file It looks like the expiration date is about 15 ...

There is a large number of 802.1x wlans created in wlc. For the work of iseI need to change the order of the authentication server for those wlans Is there only a way to go in every wlan and change it in aaa server? Is there any way to change the ord...

Hello,we have Cisco WLC controller in our company infrastructure. We need to accomplish the next configuration.We need configuration that allows users in branch office connecting to Staff SSID to get IP from branch router and users connecting to Gues...