11-18-2010 05:22 AM - edited 07-03-2021 07:25 PM
We are using WLC 4400
WLC 4400 previous running with IOS 4.2.209.0
In this IOS we were used.
WIRELESS >> Access Points >> Radios >> 802.11b/g/n >> WLAN Override
Now we are upgrad the IOS 6.0.182.0
But after this IOS upgraded we can't find this option.
WLAN Override option very much usefull for us .
pls help me
How I can enable this option ?
Thanks
Mayur
11-18-2010 05:26 AM
there is no more WLAN Override feature after 4.2 code.. its replaced by AP-Group.. it does the same fuction as that of WLAN override, the below link will provide the config example..
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
Regards
Surendra
11-18-2010 05:28 AM
sorry.. small mistake.. its 5.2 and above..
there is no more WLAN Override feature after 5.2 code.
11-18-2010 05:29 AM
sorry.. small mistake.. its 5.2 and above..
there is no more WLAN Override feature after 5.2 code.
configure AP Groups under WLAN>Advanced>AP Groups and add the APs
to the desired group to achieve the same functionality as WLAN Override.
Lemme know how this answered your question..
Regards
Surendra
11-18-2010 08:37 PM
Thanks for given me prompt answer
This is a correct ans, resolve my problem.
Thanks again
Mayur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide