01-21-2009 10:03 AM - edited 07-03-2021 05:01 PM
Hi we recently got a 4404 controller and 90 or so 1130 ap's. The corporation i work for use 1 SSID for employees and 1 for guests. With autonomous ap's you could span the employee SSID across multiple VLAN's and multiple buildings. When i try with the WLC it says "WLAN with duplicate SSID's and L2 security policy found" Is it not possible with the WLC. Any help greatly appreciated.
01-21-2009 11:05 AM
For the controllers, we can use a feature called "AP Group VLAN". This allows you to specify an SSID and what interface it is attched to, based on the AP location. Link to configure is below
http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1128591
HTH,
Steve
01-22-2009 10:59 AM
Steve
Thanks very much for this I am new to these controllers but have managed to get it working with your help.
Cheers
Simon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide