WLC 5508 and AIR-LAP1042N

[Aleksei.Zjabkin]

Hi everyone!

Question is simple, but I cannot find it in google.

Does WLC 5508 support AIR-LAP1042N?

Reagrds,

Aleksei

[Scott Fella]

Yes it is supported on the 5508. It depends on the code version and if he wlc supports that code. See the link.

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp610751

Sent from Cisco Technical Support iPhone App

[Aleksei.Zjabkin]

Thank You,

In other words I need Cisco Unified Wireless Controller SW Release 7.0 for WLC 5508 to make these two things operate with each other.

[Scott Fella]

You are correct.

Sent from Cisco Technical Support iPhone App

[Aleksei.Zjabkin]

One more question.

What poe injector is supported on AIR-LAP1042N?

I have found poe injectors for other APs.

1.AIR-PWR-B=

2.AIR-PWRINJ4

Will anyone of these support this AP?

[Scott Fella]

Either one will work:

Powering Options

• 802.3af Ethernet Switch

• Cisco AP1040 Power Injectors (AIR-PWRINJ4=)

• Cisco AP1040 Local Power Supply (AIR-PWR-B=)

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11203/data_sheet_c78-609338.html

[Aleksei.Zjabkin]

Big Thanks

[Stephen Rodriguez]

should work with the PWRIINJ4 for the injector. The PWR-B for hard power

Sent from Cisco Technical Support iPhone App

[Stephen Rodriguez]

Yes, the 5508 supports the 1042, so long as the code you are running supports them, which starts with 7.0.98.0

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp767176

HTH,

Steve

Sent from Cisco Technical Support iPad App