Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
6591
Views
0
Helpful
6
Replies

WLC 5508 - AP 3602i & 1231's

Go to solution
Martin Bosch
Level 1
Level 1

‎11-07-2012 05:25 AM - edited ‎07-03-2021 10:59 PM

Hi all,

I just got my "new toys" 2 x 5508 with 200 odd 3600 AP's.

I have setup all my SSID's and they work perfectly on code

AIR-CT5500-K9-7-2-110-0

AIR-CT5500-K9-7-2-111-3

AIR-CT5500-K9-7-3-101-0

Now when I tried adding a 1231 AP I keep getting the folloing message.

*Nov  7 13:16:27.104:  status of voice_diag_test from WLC is false

*Nov  7 13:16:27.105: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Nov  7 13:16:27.107: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down

*Nov  7 13:16:27.113: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Nov  7 13:16:27.125: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Nov  7 13:16:27.131: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down

*Nov  7 13:16:27.135: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Nov  7 13:16:27.147: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Nov  7 13:16:39.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 57.24.10.53 peer_port: 5246

*Nov  7 13:16:39.001: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Nov  7 13:16:40.912: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 57.24.10.53 peer_port: 5246

*Nov  7 13:16:40.913: %CAPWAP-5-SENDJOIN: sending Join Request to 57.24.10.53

*Nov  7 13:16:40.914: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Nov  7 13:16:40.916: %DTLS-5-ALERT: Received WARNING : Close notify alert from 57.24.10.53

*Nov  7 13:16:40.916: %DTLS-5-PEER_DISCONNECT: Peer 57.24.10.53 has closed connection.

*Nov  7 13:16:40.917: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 57.24.10.53:5246

*Nov  7 13:16:39.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 57.24.10.53 peer_port: 5246

*Nov  7 13:16:39.002: %CAPWAP-5-CHANGED: CAPWAP changed state to

*Nov  7 13:16:40.917: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 57.24.10.53 peer_port: 5246

*Nov  7 13:16:40.919: %CAPWAP-5-SENDJOIN: sending Join Request to 57.24.10.53

*Nov  7 13:16:40.919: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN

*Nov  7 13:16:40.921: %DTLS-5-ALERT: Received WARNING : Close notify alert from 57.24.10.53

*Nov  7 13:16:40.921: %DTLS-5-PEER_DISCONNECT: Peer 57.24.10.53 has closed connection.

*Nov  7 13:16:40.921: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 57.24.10.53:5246

*Nov  7 13:16:40.989: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov  7 13:16:40.990: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Nov  7 13:16:40.991: bsnInitRcbSlot: slot 1 has NO radio

*Nov  7 13:16:41.069: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

*Nov  7 13:16:41.093: %PARSER-4-BADCFG: Unexpected end of configuration file.

However, on code

AIR-CT5500-K9-7-0-220-0 and AIR-CT5500-K9-7-0-235-3 the 1231 comes and perfectly and works as well as the 3600's with all the SSID's

But my 3600's comes back with a error

Translating "CISCO-CAPWAP-CONTROLLER.flysaa.com"...domain server (57.24.108.21)

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER.flysaa.com

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ACCWirelessCon01'running version 7.0.220.0 is rejected.

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 57.24.10.53

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'ACCWirelessCon01'running version 7.0.220.0 is rejected.

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Nov  7 12:06:42.327: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

Translating "CISCO-CAPWAP-CONTROLLER.flysaa.com"...domain server (57.24.108.21)

Any idea how I can get both of them working on the controller?

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
George Stefanick
VIP Alumni
VIP Alumni

‎11-07-2012 05:31 AM

1231 with just b radios aren't supported past code 7.0

3600 isI supported on 7.2 and above ..



Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

0 Helpful
6 Replies 6

Go to solution
George Stefanick
VIP Alumni
VIP Alumni

‎11-07-2012 05:31 AM

1231 with just b radios aren't supported past code 7.0

3600 isI supported on 7.2 and above ..



Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
0 Helpful

Go to solution
Martin Bosch
Level 1
Level 1
In response to George Stefanick

‎11-07-2012 06:02 AM

So no backwards compatibility?

U said with  B radio, So I assume I can put in the add on module.

The thing is, with the 1231, being EoL the modules will be extremely expensive.

0 Helpful

Go to solution
George Stefanick
VIP Alumni
VIP Alumni
In response to Martin Bosch

‎11-07-2012 06:06 AM

Right 3600 won't work with code below 7.2.

But you know what I don't think the 1231 is supported even with the g radio .. Not enough memory .. Let me check something ..

I

Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
0 Helpful

Go to solution
Martin Bosch
Level 1
Level 1
In response to Martin Bosch

‎11-07-2012 06:08 AM

Thanks George!!! Busy trying to get a refurb / second hand ct2504-50 that can help out for the next year or so. -

0 Helpful

Go to solution
George Stefanick
VIP Alumni
VIP Alumni
In response to Martin Bosch

‎11-07-2012 06:13 AM

Sorry, but I have bad news. The 1231 isnt supported past 7.0 code regardless of the radio ..

Software Release Support for Access Points

Table 1-4 lists the controller software releases that support specific Cisco access points. The First Support column lists the earliest controller software release that supports the access point. For access points that are not supported in ongoing releases, the Last Support column lists the last release that supports the access point.

Table 1-4     Software Support for Access Points

Access Points

First Support

Last Support

1000 Series

AIR-AP1010

3.0.100.0

4.2.207.0

AIR-AP1020

3.0.100.0

4.2.207.0

AIR-AP1030

3.0.100.0

4.2.207.0

Airespace AS1200

—

4.0

AIR-LAP1041N

7.0.98.0

—

AIR-LAP1042N

7.0.98.0

—

1100 Series

AIR-LAP1121

4.0.155.0

7.0.x

1130 Series

AIR-LAP1131

3.1.59.24

—

1140 Series

AIR-LAP1141N

5.2.157.0

—

AIR-LAP1142N

5.2.157.0

—

1220 Series

AIR-AP1220A

3.1.59.24

7.0.x

AIR-AP1220B

3.1.59.24

7.0.x

1230 Series

AIR-AP1230A

3.1.59.24

7.0.x

AIR-AP1230B

3.1.59.24

7.0.x

AIR-LAP1231G

3.1.59.24

7.0.x

AIR-LAP1232AG

3.1.59.24

7.0.x

1240 Series

AIR-LAP1242G

3.1.59.24

—

AIR-LAP1242AG

3.1.59.24

—

1250 Series

AIR-LAP1250

4.2.61.0

—

AIR-LAP1252G

4.2.61.0

—

AIR-LAP1252AG

4.2.61.0

—

1260 Series

AIR-LAP1261N

7.0.116.0

—

AIR-LAP1262N

7.0.98.0

—

1300 Series

AIR-BR1310G

4.0.155.0

7.0.x

1400 Series

Standalone Only

N/A

—

3500 Series

AIR-CAP3501E

7.0.98.0

—

AIR-CAP3501I

7.0.98.0

—

AIR-CAP3502E

7.0.98.0

—

AIR-CAP3502I

7.0.98.0

—

AIR-CAP3502P

7.0.116.0

—

3600 Series

AIR-CAP3602I-x-K9

7.1.91.0

—

AIR-CAP3602I-xK910

7.1.91.0

—

AIR-CAP3602E-x-K9

7.1.91.0

—

AIR-CAP3602E-xK910

7.1.91.0

—

Note The Cisco 3600 Access Point was introduced in 7.1.91.0. If your network deployment uses Cisco 3600 Access Points with release 7.1.91.0, we highly recommend that you upgrade to 7.2.103.0.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
0 Helpful

Go to solution
George Stefanick
VIP Alumni
VIP Alumni
In response to George Stefanick

‎11-07-2012 06:15 AM

The "b" radio statment I made was becuase in order to get a 1231 connected to a WLC PRIOR to 7.0 code it required a b/g radio.

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card