WLC 5508>>RRM Question >>Coverage Hole Alogorithm

[deepakahuja09]

Hello Experts

In the bottom screenshot how to detrmine the coverage level, I couldnt find any explicit documentation on that .

Please help

Thanks in advance

Regards

Deepak Ahuja

[Stephen Rodriguez · Accepted solution]

I don't understand what you are trying to figure out. What you selected in the image has to do with the coverage hole detection, not ap 'coverage'

Steve

Sent from Cisco Technical Support iPhone App

[deepakahuja09]

Thanks for the reply Steve, what I am trying to understand is the appropiate value to be used for the Coverage level under coverage hole algorithm.

I am not sure how is that value calculated.

Thanks

Regards

Deepak

[Saravanan Lakshmanan]

check

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_rrm.html#wp1175067

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#chd-ca

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#chdca-ex

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#app4