WLC 5520 HA Configuration 8.2.151.0 software version

[DipakKayasth]

Hi,

My controller (5520) runing on 8.2.151.0 version. When I enabling SSO it gives the error please configure redundancy management vlan".

What can be done at switch side that connected to WLC management port ??

There no vlan in company. Everything is on default (Vlan-1) vlan.

My WLC Management IP : 10.12.100.6

Redundancy Mgmt Ip : 10.12.100.41

Peer Redundancy Mgmt Ip : 10.12.100.4

Redundancy port Ip : 169.254.100.41 ( Automatically)

Peer Redundancy port Ip : 169.254.100.4 (Automatically)

[Sandeep Choudhary]

Hi,

Please try to change the config to use tagged vlan "1" for Management (Redundancy Management) and try again. 

Regards

Dont forget to rate helpful posts

[Leo Laohoo]

Post the complete output to the command "sh red detail" for both units.