04-12-2016 06:24 AM - edited 07-05-2021 04:53 AM
Hi ,
I have enabled multiple traces on wlc and forgotten what are the traces .
Now how to find out and disable the traces ?
Thanks
Solved! Go to Solution.
04-12-2016 09:47 PM
Hi
You simply need to set the trace level to default. Below example for disabling trace setting for CAPWAP
ABC-AS01#set trace capwap level ?
debug Debug-level messages (7)
default Unset Trace Level Value
err Error conditions (3)
info Informational (6)
warning Warning conditions (4)
Refer below Ciscolive presentation for more information.
BRKEWN-3021-Troubleshooting Converged Access Wireless Deployments
HTH
Rasika
*** Pls rate all useful responses ***
04-12-2016 09:47 PM
Hi
You simply need to set the trace level to default. Below example for disabling trace setting for CAPWAP
ABC-AS01#set trace capwap level ?
debug Debug-level messages (7)
default Unset Trace Level Value
err Error conditions (3)
info Informational (6)
warning Warning conditions (4)
Refer below Ciscolive presentation for more information.
BRKEWN-3021-Troubleshooting Converged Access Wireless Deployments
HTH
Rasika
*** Pls rate all useful responses ***
04-18-2016 03:38 AM
How to clear previous logs int he buffer?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide