Downloading and Installing a DTLS License for an LDPE Controller
Step 1 Download the Cisco DTLS license.
a. Go to the Cisco Software Center at this URL:
https://tools.cisco.com/SWIFT/LicensingUI/Home
b. On the Product License Registration page, choose Get New > IPS, Crypto, Other Licenses.
c. Under Wireless, choose Cisco Wireless Controllers (2500/5500/7500/8500/WiSM2) DTLS License.
d. Complete the remaining steps to generate the license file. The license file information will be sent to you in an e-mail.
Step 2 Copy the license file to your TFTP server.
Step 3 Install the DTLS license. You can install the license either by using the controller web GUI interface or the CLI:
•To install the license using the web GUI, choose:
Management > Software Activation > Commands > Action: Install License
•To install the license using the CLI, enter this command:
license install tftp://ipaddress /path /extracted-file
After the installation of the DTLS license, reboot the system. Ensure that the DTLS license that is installed is active.