07-03-2023 02:54 PM
Hi,
I have a WLC 9800 and I want receive alerts of Rogue Malicious (Rogue APs and SSID) by email.
Is it possible to configure this on WLC 9800?
Another possibility would be to send this alerts from WLC 9800 to Solar Winds Monitoring (NMP).
I don't found nothing looks like for this on 9800.
Thank you!
Solved! Go to Solution.
07-03-2023 03:16 PM
If you have DNAC it can collect the rogues/ awips from the WLC and you can configure alerts based on rules
other option would be collecting it from syslog and defining rules on the syslog data
07-03-2023 03:57 PM
The WLC does not send emails. Cisco Prime does and now a days DNAC.
To work with Solar winds you can setup the WLC to send traps.
Skip to "Enabling Rogue, Mobility, RRM, and General Traps"
07-03-2023 03:16 PM
If you have DNAC it can collect the rogues/ awips from the WLC and you can configure alerts based on rules
other option would be collecting it from syslog and defining rules on the syslog data
07-03-2023 03:57 PM
The WLC does not send emails. Cisco Prime does and now a days DNAC.
To work with Solar winds you can setup the WLC to send traps.
Skip to "Enabling Rogue, Mobility, RRM, and General Traps"
07-05-2023 12:54 PM
Hi @Haydn Andrews and @Flavio Miranda,
Thank you for your reply and for sharing this information.
I'll verify this configuration.
Thank you!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide