11-26-2020 08:32 AM - edited 07-05-2021 12:50 PM
Hi all
My cisco wlc 5520
always flooding like picture below , when I cleared it , It back again and again
summary access point 250
but all access point still working normally
What wrong ? Thank for advance..
Solved! Go to Solution.
11-28-2020 08:42 AM
Problem was solve , Time zone between WLC and APs was different
Thank you all for assistance
11-26-2020 02:54 PM
There is an AP that is unable to join the controller.
Find that AP and check the status (maybe needs a reboot) or disable the port.
11-27-2020 01:08 AM
- Also check the controller's logs , perhaps you will find additional info's
M.
11-27-2020 09:07 PM
11-27-2020 10:12 PM
11-28-2020 08:42 AM
Problem was solve , Time zone between WLC and APs was different
Thank you all for assistance
04-27-2023 01:34 AM
I had the same problem.
It stopped after I disabled IPv6.
Controller - General - Global IPv6 Config -> DISABLED
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide