04-23-2015 01:17 PM - edited 07-05-2021 03:01 AM
Hi
On a WLAN , i am trying to configure local WLC as anchor controller - when i click on the Anchor controller button on the WLAN page it takes me to Anchor Controller setting - in the drop down i can see other controllers in the mobilty group but can not see the LOCAL controller option.
What could be the reason?
04-23-2015 02:53 PM
Are control and data paths UP UP on your Anchor? The other controllers must have the anchor added in the mobility groups, and the anchor must have the other controllers in the mobility group. Mobility messaging must be up. If you can verify and let us know we can certainly help get that fixed:)
Go to controller Mobility Management on all member controllers and verify they are all listed with control and data paths up up, then let us know.
~Please rate all helpful responses~
04-23-2015 07:13 PM
Hi t
thanks. I have checked in Mobility management - all data and control paths are up - so if see the other 2 controllers their i can see and select the local option but in this specific controller only its showing the remote WLCs in the drop down menu but not "itself(local)"....not getting why this is happening?
04-23-2015 08:51 PM
What model of controllers are you using? Not all controllers support Anchor termination, for example 2504's don't support anchor termination until AireOS version 8. That could be your option? Let me know what models you are working with.
~ Please rate helpful post ~
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide