WLC anchoring between 7.6.130 and 8.1.102 code

[campbech1]

I have site that is quite small with only 20 access points on a 5505 controller. Any issues with upgrading this remote site 5508 to 8.1.102 and anchoring back to our central site 7.6.130 controller?

This would be a way for us to test the 8.1.102 code without rolling it out to any of our main site just yet..

[Rasika Nayanajith]

You should not have any problem with this,unless some unknown bugs with this new code :)

HTH

Rasika

*** Pls rate all useful responses ***

[Scott Fella]

Like Rasika mentioned, it is supported.  You can get that info from the compatibility matrix:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-149658

Since v8.1 is very new, it would be hard to say how well it works.

-Scott

[Abhishek Abhishek]

Yes, it is supported. You can test the 8.1.102 code without rolling it out to any of main site.Please mark the post as answered if it satisfies your query answer.