11-23-2014 05:15 AM - edited 07-05-2021 02:00 AM
Hi all,
I want to setup WLC and Light Weight AP with this method:
- APs get the IP address from the DHCP Server.
- WLC IP is not in the same subnet with the APs.
Do I need to configure controller ip on each of the APs?OR It can detect/join the controller automatically?
thanks,
Wan
Solved! Go to Solution.
11-23-2014 10:56 AM
Hi Wan,
You have to configure DHCP option 43. That will enable your AP get WLC information when they getting DHCP IP.
Refer this document for more detail
HTH
Rasika
**** Pls rate all useful responses ****
11-23-2014 10:56 AM
Hi Wan,
You have to configure DHCP option 43. That will enable your AP get WLC information when they getting DHCP IP.
Refer this document for more detail
HTH
Rasika
**** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide