WLC Cli

[mlarnell210]

I am making a script to speed up the process on changes on a wlc. Could someone help with providing the cli command for the following..

enable/disable the radio on 802.11a

add/removing channels from the DCA list

Wlan Area

Authentication priority order for web-auth user:

Not Used Local and Ldap

Order used for Authentication: Radius

[Scott Fella]

To be honest, refer to the cli command reference for the code version you are using. Commands might change depending on what you are using.

If you have a controller already with these setting or maybe not all, from the cli, issue
show run-config commands
This will show you the commands and then you can take what you want and edit. You will have to test, because some commands need to be entered before others.

[Leo Laohoo]

Exactly how many controllers are you rolling this out on. The reason why I'm asking is:
1. Those commands can be done using GUI.
2. TO put those commands in CLI means that there are multiple commands. One mistake or omission and the command won't work.
Do you have Prime Infrastructure?