03-05-2015 05:09 AM - edited 07-05-2021 02:39 AM
Hello,
I have a 4402 WLC running version 7.0.251.2 and a WCS running version 7.0.164.0.
I was hoping to upgrade the WCS to version 7.0.240.0 but wasnt sure if it was compatible, the only document I can find is attached below, it says though '2500 series controller' at the top and it seems to state that WLC version 7.0.250.0 is the latest I can run which will support 7.0.240.0.
Does this seem correct or has anyone tried this before?
Many thanks for any help!
Derek
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
03-05-2015 06:07 AM
It is compatible. WCS, NCS and the 4400's are all EOS. Don't knownif the code is still out there or not, but your better off upgrading to the new Prime Infrastructure 2.2. I believe it's a free upgrade still if you have smartnet so you can rehost the license.
-Scott
03-05-2015 07:29 AM
Hi Scott,
Many thanks for your response!
Derek
03-09-2015 07:05 PM
Yes, they are compatible with each other and i will suggest to upgrade them to the latest version.
03-12-2015 05:15 PM
I would suggest to go for Prime Infrastructure solutions as below
WCS > NCS > PI 1.2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide