cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
16266
Views
0
Helpful
4
Replies

WLC compatibility matrix

derekinglis
Level 1
Level 1

Hello,

I have a 4402 WLC running version 7.0.251.2 and a WCS running version 7.0.164.0.

I was hoping to upgrade the WCS to version 7.0.240.0 but wasnt sure if it was compatible, the only document I can find is attached below, it says though '2500 series controller' at the top and it seems to state that WLC version 7.0.250.0 is the latest I can run which will support 7.0.240.0.

Does this seem correct or has anyone tried this before?

Many thanks for any help!

Derek

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 

 

4 Replies 4

Scott Fella
Hall of Fame
Hall of Fame

It is compatible.  WCS, NCS and the 4400's are all EOS.  Don't knownif the code is still out there or not, but your better off upgrading to the new Prime Infrastructure 2.2.  I believe it's a free upgrade still if you have smartnet so you can rehost the license.

-Scott

-Scott
*** Please rate helpful posts ***

Hi Scott,

 

Many thanks for your response!

 

Derek

Abhishek Abhishek
Cisco Employee
Cisco Employee

Yes, they are compatible with each other and i will suggest to upgrade them to the latest version.

Saurav Lodh
Level 7
Level 7

I would suggest to go for Prime Infrastructure solutions as below

WCS > NCS > PI 1.2

Review Cisco Networking for a $25 gift card