04-12-2012 02:31 AM - edited 07-03-2021 09:59 PM
Guys,
Cisco's Wireless LAN Compliance Status displays my country Mongolia as -E and says its compliant. So I'm assuming we need to purchase LAPs with -E as the regulatory domain, eg: AIR-CAP3502I-E-K9.
But on WLC, I'm not able to choose Mongolia as the country because it is not listed there. Does anyone know the full list of country codes that we can use on WLC? Is that list more than what WLC shows us or just same as the list on WLC?
If I'm not able to choose Mongolia as the country, selecting another country with -E domain will make my LAPs work?
Any comment is appreciated.
Thanks,Delgee
Solved! Go to Solution.
04-12-2012 04:51 AM
With the -E there are many profiles that can be selected, as most tend to be very close to the same restrictions.
However I would contact your local regulatory domain group and ask them which country is the same as Mongolia. Explain what you are doing and have them tell you, and get it in writing. that way you are covered on your choice.
Steve
Sent from Cisco Technical Support iPad App
04-12-2012 04:51 AM
With the -E there are many profiles that can be selected, as most tend to be very close to the same restrictions.
However I would contact your local regulatory domain group and ask them which country is the same as Mongolia. Explain what you are doing and have them tell you, and get it in writing. that way you are covered on your choice.
Steve
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide