06-29-2015 02:16 PM - edited 07-05-2021 03:29 AM
Hi Everyone,
I am configuring customer Wifi Visitor network.
WLC is connected to Switch and Switch is connected to ASA.
WLC,switch and ASA all have management vlan 10.
Switch has its default gateway set to ASA.
wlc---------------vlan 10----------------switch------------------vlan 10-----------------ASA-------internet
Management interface on WLC has its gateway IP set to IP address of vlan 10 of switch.
IS this design ok?
Regards
MAhesh
Solved! Go to Solution.
06-29-2015 02:54 PM
technically it should work , if this is L3 switch , and has default route (not default-gateway) toward the ASA .
but why don't you set the WLC gateway as the firewall interface?? rather than having two gateways in same vlan
06-29-2015 02:54 PM
technically it should work , if this is L3 switch , and has default route (not default-gateway) toward the ASA .
but why don't you set the WLC gateway as the firewall interface?? rather than having two gateways in same vlan
06-30-2015 06:56 AM
Many thanks Ali.
Regards
Mahesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide