cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
701
Views
0
Helpful
2
Replies

WLC - Filters

jacovr
Level 1
Level 1

Hi all.

 

I need some advice here.

 

I have a 5508 WLC running 8.5.140.0 and is experiencing the following:

 

  • When I click on clients, I see a total of 4450 clients connected,
  • Then I use the Filter, to search clients by Protocol
  • I then take down the number of clients in each of the 7 Protocol options.
  • When I add all the clients together, I only get to a total of 2227 clients

Am I Missing something here ?   Where is the rest of the clients ?

 

Thank You

 

 

2 Replies 2

Scott Fella
Hall of Fame
Hall of Fame
Which that many clients, you are better off running the commands off the cli. Or if you have Prime, you can run reports.
-Scott
*** Please rate helpful posts ***

Search for “Cisco wlc L3 roaming” you will find information regarding the various types of roaming.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-3/config-guide/b_cg83/b_cg83_chapter_010011.html
-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card