cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2760
Views
0
Helpful
7
Replies

WLC (Foreign-Anchor), problem with the external web auth --> ISE

armando.barrera
Level 1
Level 1

hello guys

I am currently designing a platform for a guest network, which must be isolated from the local network, the following equipment:

  • ISE 1.2 (Cisco SNS- 3415-K9)
  • WLC 7.0.230.0 (Cisco controller 5508)---> wlc Foreign
  • WLC 7.0.230.0 (Cisco controller 5508)---> wlc Anchor.

The EoIP tunnel between wlc is performed successfully.

The wireless client gets IP address of the anchor wlc (DHCP server).

Test 1:

I configure the WLC ANCHOR with local web authentication (internal), the wireless client is authenticated by WLC and navigate successfully.

Test 2:

Configure the WLC to anchor external web authentication (ISE). configure a user in ISE guest portal.

The wireless client gets IP address of the anchor wlc (DHCP server), attempting to navigate not display the guest portal.

Debug a wireless client trying to connect to the guest network is attached.