03-15-2023 05:57 PM
After our company's power outage, our air-ct2504-k9 WLC is not working. APs are flashing and not turning on at all. The same WLC we have but with less users is working fine, but I don't understand why the WLC with more users is not working. This low-end WLC does not fully meet the needs of our company. How to fix this please?
Solved! Go to Solution.
03-16-2023 02:56 AM
Time and date of the controller is incorrect. Configure NTP and the APs will join.
03-15-2023 06:00 PM
Post the complete output to the following commands:
03-16-2023 01:34 AM - edited 03-16-2023 02:47 AM
;
03-16-2023 01:50 AM
Please read and understand the instructions.
Post the complete output to the following commands:
03-16-2023 01:56 AM
03-16-2023 02:56 AM
Time and date of the controller is incorrect. Configure NTP and the APs will join.
03-15-2023 11:56 PM
- Attach a console to the WLC and scrutinize the boot process .
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide