10-31-2011 07:05 PM - edited 07-03-2021 09:01 PM
Hi
I've created a local EAP profile for PEAP authentication and configured user accounts in the WLCs. When I tried to connect to the SSID via my iPhone, popped up a certificate (local WiSM) and I accepted it then it failed with incorrect username/password. The same username/password works fine with Windows Vista laptop. Any help?
Thanks
Solved! Go to Solution.
11-02-2011 05:49 AM
I was able to use loacal eap using 7.0.220.0 and connect with my mac book, iphone and ipad.
Hope this helps.
10-31-2011 09:18 PM
That was an issue and you can search the forum on this. What code are you running by the way. I know it didn't work with the 6.x but did work with 4.2. I can test it out on the 7.0.x code.
Sent from Cisco Technical Support iPhone App
10-31-2011 09:26 PM
The s/w version is 6.0. Can you confirm whether it will work for iPhone/iPad if I upgrade the WLCs to 7.x
Thanks
10-31-2011 09:32 PM
I will test it out tomorrow.
Sent from my iPhone
11-01-2011 03:46 PM
Scott
How did you go?
11-01-2011 03:48 PM
I will have time tonight to test.
Sent from my iPhone
11-02-2011 05:49 AM
I was able to use loacal eap using 7.0.220.0 and connect with my mac book, iphone and ipad.
Hope this helps.
11-02-2011 04:28 PM
Hi Scott
I've upgraded the WLC to 7.0.222.0 and rebooted and all.
But still got the same issue for my iphone/ipad....windows laptop no problem
11-02-2011 08:20 PM
Can you post your show run-config so I can see what you did.
11-02-2011 08:38 PM
Sorry I'm unable to do that due to security reasons and blah...
I checked debug client mac-addr and it shows EAP-Failure but I dont know the reason for that as for Windows everything is fine...
11-03-2011 01:22 PM
May be just show local-auth config, show wlan x, show local-auth statistics.?
I am assuming you have only peap checked . ( and nothing else enabled like Server cert etc ). IPhone is it running latest code ?
Thanks..Salil
11-03-2011 07:16 PM
I've upgraded the iPhone OS and seems working OK...thanks guys
11-03-2011 08:18 PM
Would you mind sharing what Apple IOS version you were running when experiencing the issue and what version you upgraded to for the resolution?
01-16-2012 04:14 PM
Sorry for the delay...had issues with 4.2.1 with iPhone 3G.There are no issues with ios 5 or later with newer models
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide