Is there a way to stop the broadcasting of certain SSID's on certain access points? The customer has a WLC deployed at their main location, with a few APs hanging off of it at a remote. It would be nice if the remote location only broadcasted the networks it can support locally. Thanks!
Solved! Go to Solution.
You need to define and use AP Groups. This allows you to specify what APs will have what ssids.
Sent from Cisco Technical Support iPhone App
You need to use ap groups.
Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
HTH
Amjad
Sent from Cisco Technical Support iPad App
You need to define and use AP Groups. This allows you to specify what APs will have what ssids.
Sent from Cisco Technical Support iPhone App
You need to use ap groups.
Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
HTH
Amjad
Sent from Cisco Technical Support iPad App
Thank you very much fellas, that worked perfectly.