02-01-2007 08:53 PM - edited 07-03-2021 01:34 PM
Hi Sir,
I've deployed a WLC4404-100 at a centralized data center, controlling APs (model: LAP1242AG-C-K9) at a remote office in L3 LWAPP transport mode. WLC software version is 4.0.179.8.
Some clients face frequent disconnection. Below is a typical WLC SNMP traps for a client during the time when the client lost IP connectivity (pinging the client from a wired PC resulted in ping loss):
0 Fri Feb 2 11:48:24 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:2a:70 Slot: 0 Reason:Unspecified ReasonCode: 1
1 Fri Feb 2 11:48:20 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:24:b0 Slot: 0 Reason:Unspecified ReasonCode: 1
3 Fri Feb 2 11:48:17 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:24:b0 Slot: 0 Reason:Unspecified ReasonCode: 1
4 Fri Feb 2 11:48:14 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:1e:70 Slot: 0 Reason:Unspecified ReasonCode: 1
5 Fri Feb 2 11:48:10 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:28:10 Slot: 0 Reason:Unspecified ReasonCode: 1
8 Fri Feb 2 11:48:06 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:2a:70 Slot: 0 Reason:Unspecified ReasonCode: 1
10 Fri Feb 2 11:48:03 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:21:20 Slot: 0 Reason:Unspecified ReasonCode: 1
12 Fri Feb 2 11:47:59 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:31:e0 Slot: 0 Reason:Unspecified ReasonCode: 1
13 Fri Feb 2 11:47:56 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:1e:70 Slot: 0 Reason:Unspecified ReasonCode: 1
14 Fri Feb 2 11:47:53 2007 Client Deauthenticated: MACAddress:00:04:23:a4:11:60 Base Radio MAC:00:19:07:58:2a:70 Slot: 0 Reason:Unspecified ReasonCode: 1
Please advise what the above messages mean. I can't find further information on cisco.com
Thank you.
B.Rgds,
Lim TS
02-08-2007 12:29 PM
Client disconnecting from APs can happen if there is some obstruction between the AP and the client. This obstruction could be due to RF interference. Was a site survey performed before the network was deployed?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide